Using the CritterGuard Cedar Fence for Garden Pest Control
By Greenes Fence Company: Cedar Raised Garden Beds ... | Published: 2026-10-23
Category: Comparisons
Learn how to install the Greenes CritterGuard Cedar Fence to protect raised beds from rabbits and other pests. Step-by-step guidance, common mistakes, and product details.
Quick answer
Install the Greenes CritterGuard Cedar Fence by pushing each 45-inch panel between the posts of your Greenes Cedar Raised Garden Bed—no tools or hardware needed. The stakes sink 7 inches into the soil, leaving a 16.5-inch barrier that keeps rabbits and other small pests away from your plants.
Why the CritterGuard fence works for pest control
The CritterGuard fence is designed specifically to fit Greenes Cedar Raised Garden Beds, but it also works as a standalone barrier in any yard or garden. Its 23.5-inch height is tall enough to deter rabbits and other small animals without blocking sunlight or views.
Compared to a permanent fence, the CritterGuard is easy to move or remove for seasonal changes, and you don't need to dig posts or pour concrete. That flexibility makes it a practical choice for gardeners who want effective pest control without a permanent structure.
What to check before you start
Before installing, confirm that your raised bed has posts spaced to fit the 45-inch panel width. The fence is designed for Greenes Cedar Raised Garden Beds, but if you're using it as a standalone barrier, measure the space between your posts or stakes to ensure a snug fit.
Also, check that the soil is soft enough for the stakes to push in. If the ground is hard or frozen, water it first or loosen the soil with a trowel to avoid bending the stakes.
Step-by-step installation guide
- Measure your bed and panel fit: Measure the distance between the posts of your Greenes raised bed to confirm it matches the 45-inch panel length. For standalone use, set up stakes or posts at the correct spacing. A snug fit prevents gaps that pests can squeeze through.
- Position the first panel between posts: Hold the panel vertically and align the bottom edge with the soil line. The stakes should point downward, ready to be pushed into the ground. Make sure the fence is level before pressing down to avoid an uneven barrier.
- Press the panel down until stakes are buried: Apply firm, even pressure on the top rail to push the stakes 7 inches into the soil. If the ground is hard, water it first or loosen the soil to make the task easier. Avoid rocking the panel side to side, which can widen the hole and reduce stability.
- Repeat for remaining panels and check for gaps: Install the next panel in the same way, ensuring the edges meet flush with the previous panel. Walk around the bed to verify there are no gaps at the bottom or between panels. Even small gaps can let rabbits and other critters through, so seal any openings before planting.
Product details
- CritterGuard® Cedar Fence 45 in x 23.5 in RCCG: The Greenes CritterGuard® Fence system fits into Greenes Fence Company Cedar Raised Garden Beds. Simply push the fence between each post. You don't need tools or fasteners—installation is just a matter of pressing the panels into place, saving time and effort.
CritterGuard® Cedar Fence 45 in x 23.5 in RCCG - CritterGuard® Cedar Fence 45 in x 23.5 in RCCG: Each panel measures 45 in. long x 23.5 in. tall. Stakes push 7 in. into the soil leaving 16.5 in. of fence above the soil. This height is effective for blocking rabbits and other small pests while still allowing you to see and reach your plants easily.
- CritterGuard® Cedar Fence 45 in x 23.5 in RCCG: CritterGuard® can also be used as a barrier fence in any yard or garden. If you don't have a raised bed, you can still use these panels to protect in-ground plants or create a temporary garden enclosure.
