Start with the two heights, not the plant list
A two-tiered bed gives you two working depths in one footprint. The Premium Cedar Raised Garden Bed 2-Tiered 4 ft x 12 ft (3/4 in Thick) RC4T4S24B lists an overall height range of 7–10.5 in. That range is the first decision point: the lower tier sits at the shallow end, and stacking the routed corner posts raises the upper tier toward the taller end.
Instead of choosing crops first and hoping they fit, assign each tier a job. Put shallow-rooted, fast-turnaround crops in the lower tier and reserve the taller tier for crops that benefit from the extra depth. The exact split between tiers is not stated in the supplied record, so measure your assembled bed before you finalize the plan.
The specs that shape the planting plan
- Premium Cedar Raised Garden Bed 2-Tiered 4 ft x 12 ft (3/4 in Thick) RC4T4S24B: Size: 4' (width) x 12' (length) x 7-10.5" (height) The 4 ft width keeps every plant within arm's reach from either long side, while the 7–10.5 in height range sets the two working depths you will plant into.

Premium Cedar Raised Garden Bed 2-Tiered 4 ft x 12 ft (3/4 in Thick) RC4T4S24B - Premium Cedar Raised Garden Bed 2-Tiered 4 ft x 12 ft (3/4 in Thick) RC4T4S24B: Holds up to 32.7 cubic feet of soil This is the total for the whole two-tiered bed, so divide it between tiers before you order soil rather than filling the top tier first.
- Premium Cedar Raised Garden Bed 2-Tiered 4 ft x 12 ft (3/4 in Thick) RC4T4S24B: Routed corner posts allow stacking and expansion The tier height comes from stacking, so you can assemble the lower tier, plant it, and add the upper tier as a separate step.
- Premium Cedar Raised Garden Bed 2-Tiered 4 ft x 12 ft (3/4 in Thick) RC4T4S24B: Dovetail interlocking joints for fast, tool-free setup You can dry-fit the tiers and adjust the layout before committing soil to either level.
Assemble and fill in tier order
Build the bed in the sequence the hardware implies: lower tier first, then the stacked upper tier. The dovetail joints are tool-free, so you can test the footprint on site before filling.
- 1. Set the 4 x 12 footprint: Lay out the lower tier on level ground. The 4 ft width means you can reach the center from either side, so a path along one long edge is enough.
- 2. Assemble the lower tier: Join the sanded 3/4 in. boards with the dovetail corners. No tools are required for this step per the supplied record.
- 3. Fill the lower tier and plant it: Add soil to the lower tier and set your shallow-rooted crops before the upper tier goes on. This keeps the short tier accessible.
- 4. Stack the upper tier on the routed posts: The routed corner posts are designed for stacking. Confirm the upper tier sits securely before adding its soil.
- 5. Fill the upper tier: Use the remainder of the 32.7 cu ft total. Because the record does not give a per-tier soil volume, measure the depth of each tier as you fill and stop when the soil line reaches your planned level.
Tall tier vs short tier: a crop layout that follows the height step
Treat the two tiers as two depth zones. The lower tier is the shallower working depth; the upper tier reaches the taller end of the 7–10.5 in range. The supplied record does not name a specific depth for each tier, so confirm the split after assembly.
- Short tier: salad and herb turnover: Leaf lettuce, spinach, radishes, and herbs are reasonable candidates for the shallower tier because they are harvested before deep roots develop. Keep them close to the path edge for easy cutting.
- Tall tier: deeper-rooted and longer-season crops: Tomatoes, peppers, and bush beans fit the taller tier's extra depth. The 4 ft width supports a center row with access from both sides.
- Both tiers: flowers for pollinators: The record lists flowers alongside vegetables and herbs as suitable crops. Marigolds or nasturtiums along the short-tier edge add color without crowding the deeper crops.
Spacing in a 4 ft wide bed: rows, not grids
A 4 ft width is the practical limit for reaching the middle from either side. Plan in rows that run the 12 ft length so you never have to step into the bed.
- Short tier: two to three close rows: Sow leafy greens and radishes in bands rather than single rows. Thin as directed on the seed packet; the supplied record does not give plant spacing figures.
- Tall tier: one center row plus edge rows: Put the tallest, longest-season crop down the center and lower crops along the edges so nothing is shaded out.
- Keep a harvest path: Leave the outer few inches of each tier for reaching in. The 4 ft width means you can work from both long sides without compacting the soil.
Cedar care between plantings
The bed is made in the USA from chemical-free North American cedar and is left untreated, so it will naturally age to a silver-gray patina. The record describes the wood as naturally rot and insect resistant and lists it as safe for fruits, vegetables, and herbs.
Because the boards are untreated, avoid applying a finish without checking compatibility with edible gardening first; the supplied record does not include a finishing or treatment schedule. Between crops, top up soil in both tiers and clear spent foliage so the cedar boards can dry evenly.
What the supplied record leaves open
The record does not state a separate soil volume for each tier, a specific depth for the lower versus upper tier, or plant spacing figures. Measure your assembled bed and follow seed-packet spacing rather than guessing. If you plan to expand later, the routed corner posts support stacking, but the record does not specify a maximum number of tiers.

