Organize Garden Tools with Six Bucket Cedar Shelves
By Greenes Fence Company: Cedar Raised Garden Beds ... | Published: 2026-10-30
Category: How-to Guides
Learn how to use the Six Bucket Cedar Storage Shelves to keep your garden tools tidy, accessible, and off the ground. Step-by-step setup and organization tips included.
Quick Answer
Use the Six Bucket Cedar Storage Shelves to store garden tools in standard 5-gallon buckets, keeping them organized and portable without any tools required for assembly.
Why Cedar Bucket Shelves Work for Tool Storage
Storing garden tools in buckets keeps dirt contained and lets you move everything to the work area in one trip. The open shelf design also prevents moisture buildup that can rust metal tools.
The cedar frame is naturally resistant to decay, so it holds up well outdoors even if you keep it near a potting bench or in a shed without climate control.
Step-by-Step Setup and Organization
- Assemble the Shelf Frame: Slide the cedar panels together using the dovetail joints. No tools or fasteners are needed. Ensure each joint is fully seated for a stable frame. Check that all joints are flush before loading. A partially seated joint can loosen over time.
- Place the Frame in Its Permanent Location: Set the assembled frame on a flat, level surface. If placing outdoors, choose a spot that is protected from direct rain or use a cover to extend the cedar's lifespan. Cedar resists rot but will last longer if not constantly wet. Avoid low spots where water pools.
- Add 5-Gallon Buckets to Each Tier: Insert standard 5-gallon buckets into the six openings. Use buckets with handles for easier removal. Group tools by type: trowels and hand rakes in one bucket, pruners and gloves in another. Heavy items like soil bags go on the bottom tier to keep the frame stable. Light tools can go on the top.
- Organize Tools Inside Each Bucket: Stand long-handled tools (shovel, rake) upright in the bucket and fill around them with smaller items. For loose items like seed packets, use a smaller container inside the bucket. Avoid overfilling buckets—tools should not stick out more than a few inches above the rim to prevent tipping when you pull one out.
- Label Buckets for Quick Access: Use a permanent marker on the bucket rim or attach a weatherproof tag. Label categories such as 'Hand Tools', 'Watering', or 'Weeding'. Labels save time during busy planting seasons. Re-label as your tool collection changes.
What You Need
- Six Bucket Cedar Storage Shelves, 44 in. x 16 in. x 30 in. RCBGS6ST-20: This cedar wood frame holds standard 5-gallon buckets and assembles without tools using a secure dovetail joint system. You can set it up in minutes and start organizing immediately, and the dovetail joints keep the frame stable even when loaded with heavy buckets of soil or tools.
Six Bucket Cedar Storage Shelves, 44 in. x 16 in. x 30 in. RCBGS6ST-20
