Why CritterGuard Works for Raised Beds
If rabbits, groundhogs, or other small animals have been helping themselves to your vegetables, a simple fence can make the difference. The CritterGuard® Cedar Fence Set for 4 ft x 8 ft Cedar Raised Bed (model RCCG8PK) is designed to fit Greenes 4'x8' raised beds without cutting or modification. Each pack includes eight 4-foot-long panels that slide between the bed's posts, creating a continuous barrier around the perimeter.
The fence panels measure 45 inches long by 23.5 inches tall. When installed, the stakes push 7 inches into the soil, leaving 16.25 inches of fence above ground—enough to discourage most common garden pests without blocking your view of the plants.
What the CritterGuard Fence Set Includes
- CritterGuard® Cedar Fence Set for 4 ft x 8 ft Cedar Raised Bed RCCG8PK: Eight 4-foot-long panels, each 45 inches long by 23.5 inches tall. The panels match the length of a standard 4x8 raised bed side, so you don't need to cut or overlap them.

CritterGuard® Cedar Fence Set for 4 ft x 8 ft Cedar Raised Bed RCCG8PK - CritterGuard® Cedar Fence Set for 4 ft x 8 ft Cedar Raised Bed RCCG8PK: Stakes push 7 inches into the soil, leaving 16.25 inches of fence above the soil. This height is sufficient to deter rabbits and similar animals while keeping the fence low enough to maintain an open garden feel.
- CritterGuard® Cedar Fence Set for 4 ft x 8 ft Cedar Raised Bed RCCG8PK: Installation is easy: simply push the fence between each post. No tools, hardware, or special skills are required—just align and push the panels into place.
How to Install CritterGuard Fence on a 4x8 Raised Bed
Installing the CritterGuard fence set is straightforward and takes only a few minutes. Follow these steps for a secure fit.
- 1. Prepare your raised bed: Make sure your Greenes 4x8 cedar raised bed is assembled and placed in its final location. The fence panels are designed to fit between the bed's corner posts, so the posts must be in place.
- 2. Align the first panel: Take one CritterGuard panel and position it vertically between two corner posts on one long side of the bed. The pointed stakes at the bottom should face downward toward the soil.
- 3. Push the panel into the soil: Press the panel straight down until the stakes are fully seated. The top edge of the panel should be level with or slightly above the top of the bed's sides.
- 4. Repeat for all sides: Install the remaining seven panels around the bed's perimeter—two on each long side and one on each short side. Each panel fits between two posts without gaps.
- 5. Check for stability: Once all panels are in place, gently wiggle each one to confirm it's firmly set in the soil. If a panel feels loose, press it deeper or add a small amount of soil around the stakes.
What the CritterGuard Fence Does Not Cover
While the CritterGuard fence is effective against rabbits and many ground-level pests, it is not designed to stop climbing animals such as squirrels or raccoons. The 16.25-inch above-ground height is a practical barrier for animals that push through or dig under, but it won't prevent a determined climber from going over the top.
The supplied information does not include details about the wood treatment or weather resistance beyond the cedar material itself. Cedar naturally resists decay and insects, but no specific warranty or lifespan is provided. For questions about long-term durability or compatibility with other bed sizes, contact Greenes Fence customer service.

